A question

Questions about Arch7 Repair Tool capabilities
Post Reply
Beamg
Posts: 17
Joined: 05 Jul 2019, 05:52

Re: A question

Post by Beamg »

Vlad wrote:WD5000L, family: Hubble LT, FW: 06.1TJ, SN: WD-WX81A14E4184, LBA 976773168 - 500Gb

Code: Select all

20.06.2019 2:16:51: Test SelfScan Test ClearIBILogs begin at: 20.06.2019 2:16:51
20.06.2019 2:17:13: Elapsed time 00:00:21
20.06.2019 2:17:13: Test 00/00 begin at: 20.06.2019 2:17:13
20.06.2019 2:17:43: Test SelfScan Test CondServoGain begin at: 20.06.2019 2:17:43
20.06.2019 2:18:01: Elapsed time 00:00:17
20.06.2019 2:18:01: Test SelfScan Test DualBufferWrite begin at: 20.06.2019 2:18:01
20.06.2019 2:19:53: Elapsed time 00:01:52
20.06.2019 2:19:53: Test SelfScan Test jpGTask begin at: 20.06.2019 2:19:53
20.06.2019 2:25:00: Elapsed time 00:05:06
20.06.2019 2:25:00: Test SelfScan Test DualBufferRead begin at: 20.06.2019 2:25:00
20.06.2019 2:26:56: Elapsed time 00:01:55
20.06.2019 2:26:56: Test SelfScan Test DualBufferWriteRetry begin at: 20.06.2019 2:26:56
20.06.2019 2:27:25: Elapsed time 00:00:29
20.06.2019 2:27:25: Test SelfScan Test DualBufferReadRetry begin at: 20.06.2019 2:27:25
20.06.2019 2:28:48: Elapsed time 00:01:23
20.06.2019 2:28:48: Test SelfScan Test Cluster begin at: 20.06.2019 2:28:48
20.06.2019 2:29:50: Elapsed time 00:01:01
20.06.2019 2:29:50: Test SelfScan Test Tlist generation begin at: 20.06.2019 2:29:50
20.06.2019 2:30:20: Elapsed time 00:00:30
20.06.2019 2:30:20: Test SelfScan Test DualBufferWrite begin at: 20.06.2019 2:30:20
20.06.2019 4:19:30: Elapsed time 01:49:09
20.06.2019 4:19:30: Test SelfScan Test jpGTask begin at: 20.06.2019 4:19:30
20.06.2019 4:24:38: Elapsed time 00:05:07
20.06.2019 4:24:38: Test SelfScan Test DualBufferRead begin at: 20.06.2019 4:24:37
20.06.2019 6:18:06: Elapsed time 01:53:28
20.06.2019 6:18:06: Test SelfScan Test DualBufferWriteRetry begin at: 20.06.2019 6:18:06
20.06.2019 6:20:44: Elapsed time 00:02:37
20.06.2019 6:20:44: Test SelfScan Test DualBufferReadRetry begin at: 20.06.2019 6:20:44
20.06.2019 6:24:02: Elapsed time 00:03:18
20.06.2019 6:24:02: Test SelfScan Test RRO begin at: 20.06.2019 6:24:02
20.06.2019 6:24:59: Elapsed time 00:00:57
20.06.2019 6:24:59: Test SelfScan Test TAListGen begin at: 20.06.2019 6:24:59
20.06.2019 6:25:08: Elapsed time 00:00:08
20.06.2019 6:25:08: Test SelfScan Test Cluster begin at: 20.06.2019 6:25:08
20.06.2019 6:25:32: Elapsed time 00:00:24
20.06.2019 6:25:32: Test SelfScan Test Tlist generation begin at: 20.06.2019 6:25:32
20.06.2019 6:26:23: Elapsed time 00:00:51
20.06.2019 6:26:23: Test SelfScan Test PList begin at: 20.06.2019 6:26:23
20.06.2019 6:26:43: Elapsed time 00:00:19
20.06.2019 6:26:43: Test SelfScan Test Format begin at: 20.06.2019 6:26:43
20.06.2019 6:26:51: Elapsed time 00:00:08
20.06.2019 6:26:51: Test 00/00 begin at: 20.06.2019 6:26:51
20.06.2019 6:27:21: Test SelfScan Test ServoRRO begin at: 20.06.2019 6:27:21
20.06.2019 6:28:18: Elapsed time 00:00:56
20.06.2019 6:28:18: Test SelfScan Test PE Scan begin at: 20.06.2019 6:28:18
20.06.2019 6:30:39: Elapsed time 00:02:20
20.06.2019 6:30:39: Test SelfScan Test XMMSResults begin at: 20.06.2019 6:30:39
20.06.2019 6:30:53: Elapsed time 00:00:14
20.06.2019 6:30:53: Test SelfScan Test ClearIBILogs begin at: 20.06.2019 6:30:53
20.06.2019 6:31:00: Elapsed time 00:00:07
20.06.2019 6:31:00: Test 00/00 begin at: 20.06.2019 6:31:00
20.06.2019 6:31:31: Test SelfScan Test HealthMonitor begin at: 20.06.2019 6:31:30
20.06.2019 6:45:29: Elapsed time 00:13:58
20.06.2019 6:45:29: Test SelfScan Test SPT Write All begin at: 20.06.2019 6:45:29
20.06.2019 6:47:18: Elapsed time 00:01:48
20.06.2019 6:47:18: Test SelfScan Test SPT Read All begin at: 20.06.2019 6:47:17
20.06.2019 6:48:53: Elapsed time 00:01:35
20.06.2019 6:48:53: Test SelfScan Test SPT Write All begin at: 20.06.2019 6:48:53
20.06.2019 6:51:04: Elapsed time 00:02:10
20.06.2019 6:51:04: Test SelfScan Test SPT Read All begin at: 20.06.2019 6:51:04
20.06.2019 6:53:02: Elapsed time 00:01:57
20.06.2019 6:53:02: Test SelfScan Test SPT Write All begin at: 20.06.2019 6:53:01
20.06.2019 6:56:22: Elapsed time 00:03:20
20.06.2019 6:56:22: Test SelfScan Test SPT Read All begin at: 20.06.2019 6:56:22
20.06.2019 6:59:44: Elapsed time 00:03:22
20.06.2019 6:59:44: Test SelfScan Test CalDefectSize begin at: 20.06.2019 6:59:44
20.06.2019 7:00:05: Elapsed time 00:00:21
20.06.2019 7:00:05: Test SelfScan Test LBAButterfly begin at: 20.06.2019 7:00:05
20.06.2019 7:01:17: Elapsed time 00:01:11
20.06.2019 7:01:17: Test SelfScan Test XMMSResults begin at: 20.06.2019 7:01:17
20.06.2019 7:01:31: Elapsed time 00:00:14
20.06.2019 7:01:31: Test SelfScan Test SPTReadTime begin at: 20.06.2019 7:01:31
20.06.2019 7:01:34: Elapsed time 00:00:02
20.06.2019 7:01:34: Test SelfScan Test XMMSDRM begin at: 20.06.2019 7:01:34
20.06.2019 7:01:39: Elapsed time 00:00:04
20.06.2019 7:01:39: Test SelfScan Test ClearIBILogs begin at: 20.06.2019 7:01:39
20.06.2019 7:01:46: Elapsed time 00:00:07
20.06.2019 7:01:46: Test 00/00 begin at: 20.06.2019 7:01:46
20.06.2019 7:02:16: Test SelfScan Test LBAZero begin at: 20.06.2019 7:02:16
20.06.2019 7:12:12: Elapsed time 00:09:55
20.06.2019 7:12:12: Test 00/00 begin at: 20.06.2019 7:12:12
20.06.2019 7:12:42: Test SelfScan Test ClearIBILogs begin at: 20.06.2019 7:12:42
20.06.2019 7:12:49: Elapsed time 00:00:07
20.06.2019 7:12:49: Test 00/00 begin at: 20.06.2019 7:12:49
20.06.2019 7:13:19: Test SelfScan Test SPT Write All begin at: 20.06.2019 7:13:19
20.06.2019 7:18:28: P-list read successfully
20.06.2019 7:18:28: PList created.
20.06.2019 7:18:28: Defect log on head 0: 545 defects (540 tracks, 5 sectors ) of 53331 possible
20.06.2019 7:18:28: Defect log on head 1: 445 defects (436 tracks, 9 sectors ) of 53331 possible
But, I run selfscan after ARCO on such drives
I will try to run SelfScan twice on the same drive to test, when have time
SelfScan performed internally, controller, drivers etc, do not affect, after start
Thank You. This information does help! :D I wasn't able run ARCO as it failed very early. (Not a head issue). I'm currently working with an 500GB Hubble LT2 which is a similar drive. I just restored the original ROM and modules. Can you please provide an image or list of the exact ARCO tests you did? I think it's the WRRO test needs to be done first before selfscan.
Top
User avatar
Vlad
Разработчик
Posts: 5025
Joined: 13 Aug 2013, 07:53

Re: A question

Post by Vlad »

For hublble LT2 will be problem to find module 04
Menu
ARCO
ARCO process
Tests and parameters will be selected depend on modules in the work folder
Use "FW from packages" option for new drive
Packages can be found here
viewtopic.php?f=8&t=768#p7638
Top
Beamg
Posts: 17
Joined: 05 Jul 2019, 05:52

Re: A question

Post by Beamg »

Vlad wrote:For hublble LT2 will be problem to find module 04
Menu
ARCO
ARCO process
Tests and parameters will be selected depend on modules in the work folder
Use "FW from packages" option for new drive
Packages can be found here
viewtopic.php?f=8&t=768#p7638
OK! However, I don't have access to that part of the forum. It says I'm not authorized. Maybe you can grant me access?
Top
User avatar
SRUTSSSSSSSS80
Posts: 1546
Joined: 01 Jan 1970, 00:00
Location: USxxR

Re: A question

Post by SRUTSSSSSSSS80 »

Beamg wrote:
Vlad wrote:For hublble LT2 will be problem to find module 04
Menu
ARCO
ARCO process
Tests and parameters will be selected depend on modules in the work folder
Use "FW from packages" option for new drive
Packages can be found here
viewtopic.php?f=8&t=768#p7638
OK! However, I don't have access to that part of the forum. It says I'm not authorized. Maybe you can grant me access?
pass forum - your one key
login = login specified when purchasing
Top
User avatar
Vlad
Разработчик
Posts: 5025
Joined: 13 Aug 2013, 07:53

Re: A question

Post by Vlad »

Write to support@wdmarvel.com about forum access
Top
Beamg
Posts: 17
Joined: 05 Jul 2019, 05:52

Re: A question

Post by Beamg »

Vlad wrote:Write to support@wdmarvel.com about forum access
Email sent. When should I expect a response?
Top
Beamg
Posts: 17
Joined: 05 Jul 2019, 05:52

Re: A question

Post by Beamg »

SRUTSSSSSSSS80 wrote:
Beamg wrote:
Vlad wrote:For hublble LT2 will be problem to find module 04
Menu
ARCO
ARCO process
Tests and parameters will be selected depend on modules in the work folder
Use "FW from packages" option for new drive
Packages can be found here
viewtopic.php?f=8&t=768#p7638
OK! However, I don't have access to that part of the forum. It says I'm not authorized. Maybe you can grant me access?
pass forum - your one key
login = login specified when purchasing
Unfortunately, I wasn't able to specify a username when I paid through PayPal.
Top
User avatar
Vlad
Разработчик
Posts: 5025
Joined: 13 Aug 2013, 07:53

Re: A question

Post by Vlad »

Check email
Top
Beamg
Posts: 17
Joined: 05 Jul 2019, 05:52

Re: A question

Post by Beamg »

Vlad wrote:Check email
Unfortunately, I didn't receive your email. I see my password for the forum was changed so I decided to try the 1st key and it worked. I can also view the link above. So, I guess you updated my account. Thanks.

I still need some more help.
So, I dowloaded the 2 FW packages files. Do I just extract all the folders to a directory? Then select ROM and packages from folder. Select the folder where I extracted the packages. Then it will automatically select the right folder with the correct FW? Or, do I have to select a specific folder?
Top
User avatar
Vlad
Разработчик
Posts: 5025
Joined: 13 Aug 2013, 07:53

Re: A question

Post by Vlad »

Forum admin has update your account...
No, you need select folder exactly for your family and FW version, not the root folder
Program don't know which FW in which folder placed
Top
Post Reply

Return to “Program features (eng)”