OK, so which folder should I select for the HubbleLT2 model? I only see a HubbleLT folder.Vlad wrote:Forum admin has update your account...
No, you need select folder exactly for your family and FW version, not the root folder
Program don't know which FW in which folder placed
A question
-
Beamg
- Posts: 17
- Joined: 05 Jul 2019, 05:52
Re: A question
-
Vlad
- Разработчик
- Posts: 5025
- Joined: 13 Aug 2013, 07:53
Re: A question
Vlad wrote:For hublble LT2 will be problem to find module 04
-
Beamg
- Posts: 17
- Joined: 05 Jul 2019, 05:52
Re: A question
Right... So, it will NEVER be possible to run ARCO on this model?Vlad wrote:Vlad wrote:For hublble LT2 will be problem to find module 04
-
Vlad
- Разработчик
- Posts: 5025
- Joined: 13 Aug 2013, 07:53
Re: A question
Why never? May be, someday, somebody will publish 04 
If you have HubbleLT with dead head, you can use PCB from HubbleLT to run ARCO as LT, not LT2
If you have HubbleLT with dead head, you can use PCB from HubbleLT to run ARCO as LT, not LT2
-
Beamg
- Posts: 17
- Joined: 05 Jul 2019, 05:52
Re: A question
I was just asking.Vlad wrote:Why never? May be, someday, somebody will publish 04
If you have HubbleLT with dead head, you can use PCB from HubbleLT to run ARCO as LT, not LT2
I'm sure there's a possibility to get mod 04 in the future. Thanks for the info about using the HubbleLT PCB. I don't have a HubbleLT drive at this time. However, It's definitely nice to know this can be done.-
Beamg
- Posts: 17
- Joined: 05 Jul 2019, 05:52
Re: A question
Thanks. I'll most likely get the whole drive in the future.Smyg wrote:https://www.google.com/search?q=2060-771959-000Beamg wrote:I don't have a HubbleLT drive at this time.
-
Beamg
- Posts: 17
- Joined: 05 Jul 2019, 05:52
Re: A question
So,
I'm currently near the final ARCO steps (WriteWRRO) on an old 1TB WD10JPVT-55A1YT0 drive. I used the TREX FW for the Firebird drive. However, it only has created 372 modules. I have a donor FW for the same model which shows this model should have 476 modules. How do I go about getting the missing modules? Keep in mind I don't have the original modules. Only donor FW modules. I just would like to see if I can get the drive working again. It already shows it was sized down to 768GB after the Zone TPI calc test. This test alone took a over a day to complete.
I'm currently near the final ARCO steps (WriteWRRO) on an old 1TB WD10JPVT-55A1YT0 drive. I used the TREX FW for the Firebird drive. However, it only has created 372 modules. I have a donor FW for the same model which shows this model should have 476 modules. How do I go about getting the missing modules? Keep in mind I don't have the original modules. Only donor FW modules. I just would like to see if I can get the drive working again. It already shows it was sized down to 768GB after the Zone TPI calc test. This test alone took a over a day to complete.
-
Vlad
- Разработчик
- Posts: 5025
- Joined: 13 Aug 2013, 07:53
Re: A question
No need to do something with modules, if ARCO and SelfScan will be completed without errors
-
Baraka
- Posts: 10
- Joined: 29 May 2017, 07:29
Re: A question
Sorry to hijack thread but I have a related question.
I have a WD3200BEVT-11A03T0 with PCB 701609. I accidentally rewrote the ROM from another WD3200BEVT but different firmware version.
Now the drive will not spin up. There is no external ROM so PCB seems bricked.
Is there any way to rewrite the ROM using TTL for these PCBs?
I have a WD3200BEVT-11A03T0 with PCB 701609. I accidentally rewrote the ROM from another WD3200BEVT but different firmware version.
Now the drive will not spin up. There is no external ROM so PCB seems bricked.
Is there any way to rewrite the ROM using TTL for these PCBs?