A question
Rebuild ROM with WDMarvel
Is it Possible to Rebuild ROM with WDMarvel? And how?
I have WD3200AAJS with damaged U12. But I have very good Donor with working U12. But Microjog Data seems slightly off...
I have WD3200AAJS with damaged U12. But I have very good Donor with working U12. But Microjog Data seems slightly off...
- Spildit
- Сообщения: 244
- Зарегистрирован: 02 янв 2016, 09:05
- Откуда: Portugal - Europe
- Контактная информация:
Re: Rebuild ROM with WDMarvel
The HDD Oracle - Platform for OPEN research on Data Recovery.
Re: Rebuild ROM with WDMarvel
Im not "allowed" to access this part of the forum.
Re: Rebuild ROM with WDMarvel
If you are asking about building ROM image from copies in 0x010x modiles, then yes
If you are asking about writing ROM in PCB eith corrupted ROM image, then no
If you are asking about writing ROM in PCB eith corrupted ROM image, then no
- Spildit
- Сообщения: 244
- Зарегистрирован: 02 янв 2016, 09:05
- Откуда: Portugal - Europe
- Контактная информация:
Re: Rebuild ROM with WDMarvel
He is asking about rebuilding ROM on a drive with external ROM chip, (no copies of ROM modules on SA) to working donor PCB.Vlad писал(а):If you are asking about building ROM image from copies in 0x010x modiles, then yes
If you are asking about writing ROM in PCB eith corrupted ROM image, then no
The HDD Oracle - Platform for OPEN research on Data Recovery.
A question
Hi.
I have several hard drives of the samsung spinpoint M8 family such as st320lm000, some of them have fisical damage in the drive but the logical board is fully functional other have non functional logical boards
So if i swap the logic card i have a working hard disk (i have benchmark them and they work nicely) but they keep showing the error of the previous disk.
My question is this:
If i use WD marvel can i clear the previous erros stored in the smart so the logic board detects the state of the current drive?
Thanks in advance
I have several hard drives of the samsung spinpoint M8 family such as st320lm000, some of them have fisical damage in the drive but the logical board is fully functional other have non functional logical boards
So if i swap the logic card i have a working hard disk (i have benchmark them and they work nicely) but they keep showing the error of the previous disk.
My question is this:
If i use WD marvel can i clear the previous erros stored in the smart so the logic board detects the state of the current drive?
Thanks in advance
- SRUTSSSSSSSS80
- Сообщения: 1543
- Зарегистрирован: 01 янв 1970, 00:00
- Откуда: USxxR
Re: A question
Only HDD Western Digital, samsung spinpoint M8E support - MRT, DFL, PC3000, SHT, SHTR, SHTRD, SeDiv, SRT, HDR3000.....etcvilla01 писал(а):Hi.
I have several hard drives of the samsung spinpoint M8 family such as st320lm000, some of them have fisical damage in the drive but the logical board is fully functional other have non functional logical boards
So if i swap the logic card i have a working hard disk (i have benchmark them and they work nicely) but they keep showing the error of the previous disk.
My question is this:
If i use WD marvel can i clear the previous erros stored in the smart so the logic board detects the state of the current drive?
Thanks in advance
- Spildit
- Сообщения: 244
- Зарегистрирован: 02 янв 2016, 09:05
- Откуда: Portugal - Europe
- Контактная информация:
Re: A question
S.M.A.R.T. is stored on the MC (platters) and NOT on the PCB ... ROM on those drives are NOT unique and don't have adaptives ... So the "status" that you see on S.M.A.R.T. is the real status of your drive.villa01 писал(а):
So if i swap the logic card i have a working hard disk (i have benchmark them and they work nicely) but they keep showing the error of the previous disk.
You can clear S.M.A.R.T., etc with the mentioned tools.
WDMarvel is for WD drives only and with Marvell MCU.
The HDD Oracle - Platform for OPEN research on Data Recovery.
-
- Сообщения: 12
- Зарегистрирован: 14 дек 2018, 12:26
try to reset password at WDC WD60EZRZ-00GZ5B1
Hi, I m trying to reset password at WDC WD60EZRZ-00GZ5B1 , wdc marvel identfy the drive but I get error restarting fw
picture
https://ibb.co/fF6Prws
picture
https://ibb.co/fF6Prws
Re: try to reset password at WDC WD60EZRZ-00GZ5B1
Did you try Clear password method 2 button?