Problem with WD Marvel Demo

[locarno]

Hot swap don't help.
How to get to Service Area ?

Please.



and SMART



Disk is not broken. Is PROTECTED

[Vlad]

The controller is switched to compatible/IDE mode?
Demo version detects a family of hdd?
Describe in detail, as you did hot swap?

[locarno]

1.Disk is in enhanced mode (comactibile mode is not different)
2.I don't know, (no english version)
3.Hot swap didn't help.

[Vlad]

Program work only! with controllers in IDE mode
I'm not sure that under the hot swap, we mean the same thing
What program you use to stop the spindle, in enhanced mode of the controller?

Family

[locarno]

WD3200BUDT is a 2,5 SATA HDD

My settings in BIOS (MB P4p800 deluxe)
Primary IDE Master: WDC WD3200BUDT-62D

Ide Configuration
Onboard IDE Operate Mode: Compatibile Mode
IDE port settings: Secondary P-ATA
Ide detectc Time Out (sec): 35
HDD Detect Time: Quick

What's wrong ?

Look. This ?



If I want to erase HDD I get this:

[SRUTSSSSSSSS80]

Code: Select all

Intel    ID 29C0*      Host     0000   0002  
Intel    ID 29C1*      PCI brg  0000   0002  
Intel    ID 27D8*      0403     0004   0002  
Intel    ID 27D0*      PCI brg  0000   0002  
Intel    ID 27D2*      PCI brg  0000   0002  
Intel    ID 27C8*      USB ctrl 0000   0002  
Intel    ID 27C9*      USB ctrl 0000   0002  
Intel    ID 27CA*      USB ctrl 0000   0002  
Intel    ID 27CB*      USB ctrl 0000   0002  
Intel    ID 27CC*      USB ctrl 4000   0002  
Intel    ID 244E*      PCI brg  0000   0002  
Intel    ID 27B8*      ISA brg  0000   0002  
Intel    i82801G IDE   Int ATA  01F0   03F6  
Intel    i82801G IDE   Int ATA  0170   0376  
Intel    82801GB SATA  Int ATA  E800   E902  
Intel    82801GB SATA  Int ATA  EA00   EB02  
Intel    ID 27DA*      SMBus    0000   0002  
Nvidia   ID 01DF*      Video    0000   000E  
CMD/SiI  ID 3132*      Ext ATA  4004   0002  
CMD/SiI  ID 3132*      Ext ATA  0004   0002  
Realtek  ID 8168*      Network  D000   0002  

Intel i82801EB

Code: Select all

Intel ID 2570* Host 0008 0002 
Intel ID 2571* PCI brg 0000 0002 
Intel ID 24D2* USB ctrl 0000 0002 
Intel ID 24D4* USB ctrl 0000 0002 
Intel ID 24D7* USB ctrl 0000 0002 
Intel ID 24DE* USB ctrl 0000 0002 
Intel ID 24DD* USB ctrl 0000 0002 
Intel ID 244E* PCI brg 0000 0002 
Intel ID 24D0* ISA brg 0000 0002 
Intel i82801EB/ER Int ATA 01F0 03F6 
Intel i82801EB/ER Int ATA 0170 0376 
Intel i82801EB IDE Int ATA C000 C402 
Intel i82801EB IDE Int ATA C800 CC02 
Intel ID 24D3* SMBus 0000 0002 
Intel ID 24D5* Audio D800 DC02 
ATI ID 5960* Video 0008 9002 
ATI ID 5940* Display 0008 0002 
12B9* ID 1008* Serial A000 0002

[Vlad]

Ide Configuration
Onboard IDE Operate Mode: Compatibile Mode
IDE port settings: Secondary P-ATA

The BIOS settings are correct
Make the following items
1 If there is Primary IDE slave device, disconnect it
2 In windows device manager, turn off the locked hdd


3 In WDMarvel, click the button 1, then 2

4 Make screenshot and post it

[Vlad]

I do not want to know the family, I want to understand the hdd takes vendor commands or not

[Vlad]

От него или такого же?
Если от него, то не понятно что мешает сбросить пасс

[locarno]

SRUTSSSSSSSS80

Pri Master: WDC WD3200BUDT-62DPZY0 01.01A01
Sec Master: CD-ROM

When I turn on the computer i get the message: Primary master hard drivve error
On WD5000AVVS i've got this same before unlock. After unlock by zu.betta , hdd work's good.




Vlad



If you can, please use English.

What is module 02 ?

@EDIT
I'm use mini xp from hiren's boot.